| XC3000 | XC4000E | XC4000X | XC5200 | XC9000 | Spartan | SpartanXL | Virtex |
|---|---|---|---|---|---|---|---|
| N/A | Macro | Macro | N/A | N/A | N/A | N/A | N/A |
BUFOD is a buffer with input (I) and open-drain output (O). When the input is Low, the output is Low. When the input is High, the output is off. To establish an output High level, a pull-up resistor is tied to output O. One pull-up resistor uses the least power; two pull-up resistors achieve the fastest Low-to-High speed.
To indicate two pull-up resistors, append a DOUBLE parameter to the pull-up symbol attached to the output (O) node. Refer to the appropriate CAE tool interface user guide for details.
Figure 3.40 BUFOD Implementation XC4000 |  |
