FTCLE
Toggle/Loadable Flip-Flop with Toggle and Clock Enable and Asynchronous Clear
XC3000
| XC4000E
| XC4000X
| XC5200
| XC9000
| Spartan
| SpartanXL
| Virtex
|
|---|
Macro
| Macro
| Macro
| Macro
| Macro
| Macro
| Macro
| Macro
|
FTCLE is a toggle/loadable flip-flop with toggle and clock enable and asynchronous clear. When the asynchronous clear input (CLR) is High, all other inputs are ignored and output Q is reset Low. When load enable input (L) is High and CLR is Low, clock enable (CE) is overridden and the data on data input (D) is loaded into the flip-flop during the Low-to-High clock (C) transition. When toggle enable (T) and CE are High and L and CLR are Low, output Q toggles, or changes state, during the Low- to-High clock transition. When CE is Low, clock transitions are ignored.
The flip-flop is asynchronously cleared, output Low, when power is applied. For CPLDs, the power-on condition can be simulated by applying a High-level pulse on the PRLD global net. FPGAs simulate power-on when global reset (GR) or global set/reset (GSR) is active. GR for XC3000 is active-Low. GR for XC5200 and GSR (XC4000, Spartans, Virtex) default to active-High but can be inverted by adding an inverter in front of the GR/GSR input of the STARTUP or STARTUP_VIRTEX symbol.
Inputs
| Outputs
|
|---|
CLR
| L
| CE
| T
| D
| C
| Q
|
|---|
1
| X
| X
| X
| X
| X
| 0
|
0
| 1
| X
| X
| 1
| 
| 1
|
0
| 1
| X
| X
| 0
|
| 0
|
0
| 0
| 0
| X
| X
| X
| No Chg
|
0
| 0
| 1
| 0
| X
| X
| No Chg
|
0
| 0
| 1
| 1
| X
|
| Toggle
|
