MUXF6_D

2-to-1 Lookup Table Multiplexer with Dual Output

MUXF6_D provides a multiplexer function in a full Virtex CLB for creating a function-of-6 lookup table or an 8-to-1 multiplexer in combination with the associated four lookup tables and two MUXF5s. The local outputs (LO) from the two MUXF5s in the CLB are connected to the I0 and I1 inputs of the MUXF5. The S input is driven from any internal net. When Low, S selects I0. When High, S selects I1.

Outputs O and LO are functionally identical. The O output is a general interconnect. The LO output is used to connect to other inputs within the same CLB slice.

See also “MUXF6” and “MUXF6_L”.