Previous

XC5200 Simulation Template Dialog Box

Click the General, VHDL/Verilog, or EDIF tab to access the different options within the Simulation Template dialog box. Use the different tabs of this dialog box to set the options described in this section.

Click OK to accept the template, click Cancel to exit the dialog box without changing any settings, click Default to set the default options, or click Help to obtain online help.

XC5200 General Tab

Use the XC5200 General tab, shown in the following figure, to set the general simulation options.

Figure 5.49 XC5200 Simulation Template General Tab

The XC5200 General tab is identical to the tab described in the “Spartan General Tab” section.

XC5200 VHDL/Verilog Tab

Use the XC5200 VHDL/Verilog tab, shown in the following figure, to set the VHDL or Verilog options.

Figure 5.50 XC5200 Simulation Template VHDL/Verilog Tab

The XC5200 VHDL/Verilog tab is identical to the tab described in the “Spartan VHDL/Verilog Tab” section.

XC5200 EDIF Tab

Use the XC5200 EDIF tab, shown in the following figure, to set the EDIF options.

Figure 5.51 XC5200 Simulation Template EDIF Tab

The XC5200 EDIF tab is identical to the tab described in the “Spartan EDIF Tab” section.

Next