Creating LogiBLOX Modules

Once you have opened LogiBLOX, create a module as follows:

1. Enter the name of the module you want to create in the Module
   Name field, or select an existing one from the list box.
   
   
2. Select the type of module from the Module Type list box.
   
   
3. Select the bus width for the module from the Bus width list box.
   
   
4. Select or deselect optional pins of the module symbol displayed in the Details box by clicking the appropriate check boxes.
   
   
5. Click OK. LogiBLOX automatically creates the MOD file, which contains symbol pins and a template for each module, and an EDIF netlist for simulation.
   
   

The Project Manager automatically converts the EDIF netlist and reads the generic module file from the \FNDTN\ACTIVE\CONFIG\LOGIBLOX directory and the MOD file to customize the module symbol. The Project Manager then generates the ALR and ASX files containing the module's binary netlist and ports description and saves the module to the project working library. The module is then ready to use in your project.